LPHV = Low Pressure High Volume System
The dust and shavings of LPHV extractors are sucked through the impeller fan blade and then the waste falls into the lower bag, the air being exhausted through the top filter bag, collecting some of the fine dust on the way. This type of extraction shifts huge volumes of air at low pressure and they are very efficient at removing bulk waste such from Planers, Thicknessers and Wood Lathes etc, hence some people call them chip collectors. The down fall with all LPHV dust collector systems is when you reduce the intake hose from 100mm to 32mm the air flow volume is affected dramatically. The fine filtration efficiency can be improved somewhat by fitting a filter cartridge instead of the bag.
Please Note: Due to the enormous centrifugal force generated by the heavy duty 5hp motor, all 4 wheels are required to be locked prior operating dust collector.
3860cfm air flow suction
4 x Ø100mm extraction inlets
Portable on swivel wheels with brakes
Quick-action top and bottom bag clamps
DOL safety start/stop switch
Ø600mm filter drums
2.5 micron filter bags
1800mm high filter bags
1200 high collection bags
Ø432mm impeller blade
3.75kW / 5hp 415V motor
MADE IN TAIWAN