Delem DA-66T CNC CONTROL UNIT
The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity
The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application.
The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.
Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever.
2D graphical touch screen programming mode
3D visualisation in simulation and production
17″ high resolution colour TFT, 1280 x 1024 pixels, 16 bit
Full touch screen control (IR-touch)
Standard Windows networking
Delem Modusys compatibility (module scalability and adaptivity)
USB, peripheral interfacing
User specific application support within the Controls multitasking environment
Sensor bending and correction interface
Colour LCD display
Memory capacity 1 GB
Product and tools memory 256MB
3D graphics acceleration
2nd HSB Modusys bus
USB flash memory drive
Baykal machine frames consist of a monolithic structure with hot rolled steel sheets of Fe 520 welded together. The two housings (shoulders) are obtained from the same sheet to ensure the same elasticity under stress. The ram and table are also obtained from Fe 520 steel sheets and are opportunely dimensioned to avoid deflection
The hydraulic cylinders are manufactured from high resistance steel incorporating chromium plated and ground rods. Completed with lapped pistons to ensure longevity of the hydraulic seals
The hydraulic unit is made by major companies in the field. It consists of electronically controlled proportional valves with independent closed loop control of the two cylinders.
5 CNC Controlled Axis (Y1, Y2, X, R, W) as standard. Multi Axis available
Full electronic Synchronisation with proportional valve technology.
German manufactured Laser-Safe Guard System mounted at each end of machine ensuring correct interfacing and operator safety whilst in operation. Laser-safe is designed so each guard will slide up or down to allow for many different types and sizes of tooling enabling safety at the appropriate points as required by the Australian standards. Manual height adjustment with scales and lock for easy positioning.
Sliding steel fabricated front sheet supports enabling a wide range of material sizes to be aligned and supported at the correct required width and height. This function is achieved by the precision linear guides mounted on the front apron parallel to the tooling length. This design can also be adjusted vertically to support material with return bends.
Ram positions (Left and Right) are obtained from independent linear encoders whilst monitoring and adjusting proportional valves. This produces a double closed loop system, with guaranteed beam positioning of +/- 0.01mm (Y1 and Y2 Axis)
Electronic control of bending parallelism is via the Delem DA-66T CNC Control
Accuracy is further ensured by mounting the linear encoders on a C-frame connected directly to the Bed, rather than the side frames. This ensures that deflection of the side frames and uneven loads have no effect on Beam position.
CNC Controlled Back-gauge:- X-Axis stroke 750mm with DC motor mounted on hardened and machined guides, translation via spherical recirculation Ball screws
Delem DA-66T CNC Control fully programmable with 2D graphics offline software included
Axes are driven by ESA servo amplifiers ensuring the perfect interface with the ESA Control
Precision linear scale measurement : HEIDENHEIN or GIVI MISURE
Y1-Y2 – X-R CNC – controlled stroke axes
CNC controlled hardened ballscrew backgauge with X-axis
X axis range = 750mm speed = 350 mm/s max.
2 micrometric backgauge finger stops with lateral adjustment
Front support arms fully adjustable mounted on linear rails x 2 off easy positioning over the complete working length of the machine
Quality Siemens Electric control switch Gear is used
Pendant control panel centralising all Press-Brake Functions
Foot Pedal Control, Emergency stop buttons
2 axis tower type backgauge with AC servo motors
X-R CNC axis ,
bar length 2400 mm ( size 200×150 mm )
Z movement manual with double ball linear guides
fixing on lateral housings
“X” axes stroke 750 mm
“R” axes stroke 160 mm
2 micro adjustable fingers with 2D stops sliding all long the bar
Hardening on fingers
All movements on ball screws and ball guides
AC servo brushless motors
“X” axis speed of 350 mm/sec
“R” axis speed 240 mm/sec
Mechanical accuracy 0.1 mm
Hydraulics: Hoerbiger and Parker (German and USA)
Electrics: Siemens or Telemecanique (German or French)
Scales: Misure or Heidenhain (Italian or Dutch)
Tooling: Technostamp (Italian)
Control: ESA (Italy)
Mild steel capacity is rated on hot rolled material with 250MPA
Delem DA-66T CNC Control 2D Graphical CNC Control
Offline graphical 2D software
Y1-Y2 cylinder axis
X – R Backguage
W – table crowning
Quick release top tool clamping system
AKAS Safety laser front guarding system
Mechanical crowning on bottom table
13mm slot in bottom table for single vee dies