Turret Milling Machine Inverter Variable Speed and Geared Head – Horizontal and Vertical

This HM-53GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 150mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 1″ and 1-1/4″ horizontal arbors, 2 and 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
Swivel table
1″ and 1-1/4″ horizontal arbors

SKU: M162D, Model: HM-53GV, Capacity: (X) 600mm (Y) 200mm (Z) 340mm, Capacity2: Includes Digital Readout, Vice and Collet Chuck System, Brand: HAFCO METALMASTER

Add to quote View product

Description

This HM-53GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 150mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 1″ and 1-1/4″ horizontal arbors, 2 and 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
Swivel table
1″ and 1-1/4″ horizontal arbors

Electronic inverter variable spindle speeds
3 Axis digital readout system
Swivel table left and right with graduated scale
Mill head tilts to ±90º left to right
500mm horizontally sliding and rotating ram
NT30 Horizontal and vertical spindles that are hardened and ground
Precision-ground dovetail slide-ways and table
Precision milling table incorporating machined T slots
Rear concertina slide-way cover
Forward and reverse button switch
Fine hand wheel operated quill feed
Swarf and splash tray
Spindle lock for quill
Metric dial graduations @ 0.02mm for X , Y and Z-Axis
Vertical dial graduations on hand wheel @ 0.05mm
All slides utilise dovetail construction for maximum rigidity
Includes 1″ and 1-1/4″ arbors for the horizontal spindle

* Note: X and Y travels maybe reduced due to digital readout scales and safety stops
* Note: Optional Y and Z power feeds require additional parts and fitting (not included)

Electronic inverter variable spindle speeds
3 Axis digital readout system
X-Axis power-feed
Safety cutter guard
Swarf tray
Coolant system
Halogen lamp
150mm machine vice
Drill chuck and arbor
2 and 3MT adaptors
8-piece metric collet chuck set (4-16mm)

 

Additional information

ORDER CODE

Model

Digital Readout

Type

Table Size

Spindle Taper - Vertical

Spindle Taper - Horizontal

Cross Travel (Y-Axis)

Vertical Travel (Z-Axis)

Type of Slides

Ram Travel

Spindle to Table

Quill Travel / Diameter

Throat Depth (max.)

Tilting Head (Left ~ Right)

Tilting Head (Forward ~ Back)

Drilling Capacity

End Milling Capacity

Face Milling Capacity

Power Feed - Quill

Power Feed - Cross (Y-Axis)

Table T-Slot Size

Work Table Load Capacity