This is a rugged and well made machine with good capacities and plenty of power, a good choice for a serious home engineer.
The belt driven head provides a useful range of 12 speeds, 100-2080rpm and is quiet in operation, the head can be re-positioned on the column with the aid of a handle driven rack and pinion drive.
The table has three T slots to allow the work to be directly mounting to table, or in a milling vice, with two large diameter control hand wheels with metric calibrations for the longitudinal axis.
The fine down feed control can be locked firmly in position when milling and the mill also features an easy-to-read depth stop.
Optional power feed provides smooth variable speed drive to longitudinal travel
Quiet B section belt drive system
Milling head rotates 360º on column
Extra large 820 x 240mm ground work table with T-slots
Adjustable leadscrew nuts eliminating backlash on both axis
Fine feed hand wheel operating quill feed
Forward and reverse on/off switch
3MT spindle with 75mm diameter quill
Adjustable table and drill length stops
Rack and pinion wind-up head
Rear slide-way cover and slide clamps on all axis
Spindle lock for quill
Table lock on both axis
Metric dial graduations @ 0.05mm for X and Y axis
Optional power feed fits straight on the table
Machine stand (M135A)
14mm clamp kit set (C0965)
Collet chuck set (C922B)
10 piece metric slot and end mill set (M3301)
3MT-2MT drill sleeve
Face cutter and arbor
3″ tilting vice
Safety cutter guard