Description
The HM-46 milling machines is similar in overall size to the popular RF-31 or HM-32 but with the additional benefit of a 6-speed 95-1600rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out.
The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling.
The motor is controlled by a standard forward and reverse on/off switch.
There is a heavy duty steel stand available as an extra, strongly recommended bearing in mind the weight of the machine.
Also available is a optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive.
Gear driven head 6 speeds
Dovetail vertical Z-axis
Mill head tilts to ±90º from vertical with digital display
Large 730 x 210mm ground work table with T-slots
Adjustable leadscrew nuts eliminating backlash on both axis
Fine feed hand wheel operating quill feed
Forward and reverse on/off switch
Digital tilting head gauge
3MT spindle with 75mm diameter quill
Adjustable table and drill length stops
Rack and pinion wind-up head
Rear slide-way cover and slide clamps on all axis
Spindle lock for quill
Table lock on both axis
Metric dial graduations @ 0.05mm for X and Y axis
Drill chuck
3MT arbor
3MT-2MT drill sleeve
Face cutter and arbor
Safety cutter guard
Digital tilting head gauge